|
@80C3.ADF ARTIST XJS MC Graphic Adapter
This adapter uses the TI TMS34020A chip, which is a good chip, but requires
you to use the TIGA software. So the included TIGA drivers will work under
Win 3.1x...
xjsdisk1.zip ARTIST XJS Drivers Version 1.12 (5/93) Disk 1
xjsdisk2.zip ARTIST XJS Drivers Version 1.12 (5/93) Disk 2
Files for other Artist Graphics controllers
Artist XJS MC Base Card
J3 DE9 video connector
J4 HDD15 video connector
JP1,2 50-pin sockets
U1 TI TMS34020AGBL-32
U4 32.000 MHz osc
U5 Artist 1-GA 105J
U10-17 MT42C4256Z-8
U18 Dual 72 pin SIMM Sockets
|
U25 Artist 1-GA 105J
U26 Brooktree Bt438KPJ
U29,30 160.0000 MHz osc
U31 Brooktree Bt458LPJ165
U32 Artist 1-GA 105J
U34-36 5020-5
VR1 Bourns 3321N 1K Pot
|
U29 and U30 Pixel Clocks
64 MHz, 80 MHz, 108 MHz, 128 MHz, 130 MHz, 135 MHz, 140 MHz,
160 MHz
ARTIST XJS MC Graphic Adapter Daughter
Card
|
JP1,P2 50-pin header
U1-6 MT42C4256DJ-8
|
AdapterId 080C3H ARTIST XJS MC Version 2.0
I/O Base Address
<Range 03EXh>,
Range 03DXh, Range 02DXh, Range 02EXh, Range 06CXh
PC Memory Address
This 16KB block in PC memory maps to two 8KB windows in
the 34020 memory space. These 8 KB windows can each be mapped to
start at any 8 KB boundary in the 34020 memory space.
<Segment CC00>,
C800, D000, D400, D800, DC00
Interrupt Request Option
This graphic controller can be configured to send either
hardware interrupt IRQ10 or IRQ11 from the 34020 Graphics Processor to
the microchannel bus.
<Interrupt -IRQ10>,
Interrupt -IRQ11
|