@608D.ADF "Hyperam MC 32/16 SIMM"
Hypertec Hyperram MC32/16
Hypertec Hyperram MC32/16 (scan by Basil Holloway)
Pads for PGS PLCC
This puppy uses ZIPs like those used on the XGA and 8590 planars. There are
two horizontal banks with 32 sockets each, plus another two vertical banks of
four sockets each at the lower left corner of the adapter.
ADF Sections AdapterID 608D "Hyperam MC 32/16 SIMM"
EMS window address
To configure the Hyperam MC 32/16 for expanded memory, an EMS
'window' must be allocated through which the expanded memory can be accessed.
This 'window' can be from 64kb to 128kb in size and must not conflict with
other devices that are already installed in your system. If you do NOT wish to
have the Hyperam MC 32/16 memory used as expanded memory, you must allocate a
16kb 'window' that is used to initialise the board for extended memory. Again,
this window must not conflict with other devices.
<"C000-CFFF (64K)">, C400-D3FF
(64K), C800-D7FF (64K), CC00-DBFF (64K), D000-DFFF (64K), C000-D7FF (96K),
C800-DFFF (96K), C000-DFFF (128K), C400-C7FF (16k - EMS off), C800-CBFF
(16k - EMS off), CC00-CFFF (16k - EMS off), D000-D3FF (16k - EMS off),
D400-D7FF (16k - EMS off), D800-DBFF (16k - EMS off), DC00-DFFF (16k -