(C) Copyright IBM Corp. 1989 - 1999.  All rights reserved.

	       IBM BookManager Index Utility for Windows 
			  Version 2.2
		    Product Number: 5639-I14

	 Product Installation Instruction & Release Notes

Welcome to IBM BookManager Index Utility for Windows NT and Windows 95   **

This README file contains information you need for installation,
as well as information that was not available for our printed publications.
This README file is divided into the following categories:

   -  Product prerequisites
   -  Installation
   -  Important Information
   -  Getting Help
   -  Late-Breaking News & Hints

PRODUCT PREREQUISITES
---------------------

Before installing this product check to see that the following
hardware and software resources are available:

      Any system unit capable of running Microsoft Windows NT, V4.0 (Service Pack 3 or higher) or
       or Windows 95.  A 486SX processor at 33MHZ or higher is recommended.

      Display monitor

      Any pointing device

      One CD-ROM device

      4MB of RAM in addition to that required by the operating system

      5MB of hard-disk drive storage in addition to that required by the
       operating system


INSTALLING IBM Index Utility for Windows NT and Windows 95
--------------------------------------------------------------


   1.  Insert the BookManager Index Utility CD in your CD-ROM drive.

   2.  In Program Manager, select Run from the File menu.

   3.  Type the location you're installing from plus the word setup.  For
       example, to install an English version of the product from
       a CD-ROM drive labeled g, type the following:

	  g:\IndexW22\setup.exe

    4.  Select OK, and follow the online installation instructions.

NOTE1:  If you do not start SETUP.EXE in the directory where it
    resides, or if you do not fully qualify the path for SETUP.EXE, then
    a different SETUP.EXE may be started.

Note2: If you are installing to NT version 4 with the
Windows 95 shell it may be neccessary to modify environment settings. If
the product fails to start because it can not find help then do the
following:

   1.  Open the "Control Panel" from "My Computer"

   2.  Open "System" to bring up the "System Properties"

   3.  Click on the "Environment" tab

   4.  In the "System Variables" section add or append "PATH" and "HELP":

     a. Variable: PATH   Value: C:\Program Files\IBM\IBM BookManager Index Utility for Windows32\INDEX32;
     b. Variable: HELP   Value: C:\Program Files\IBM\IBM BookManager Index Utility for Windows32\INDEX32;

     note: The Value should represent the path you installed BookManager
	   Index Utility. This is where the help files and executables are located.

   5.  Click OK, IBM BookManager Index Utility for Windows32 should now start.


IMPORTANT INFORMATION
---------------------

Please refer to the section below for information on how to obtain the
latest corrective service for this product.  We recommend you obtain
corrective service at installation time.

GETTING HELP on BookManager Products
------------------------------------

The following contains information on getting service and support for
BookManager products.  Both electronic and telephone support are
available.


ELECTRONIC SUPPORT
------------------
Electronic support is available via Internet.  This support covers:
  - Hint & Tips
  - Most Frequently Asked Questions & Answers
  - Fixes (for some BookManager products)

INTERNET
--------
Web:
   BookServer Home Page - see Service & Support icon:
      http://booksrv2.raleigh.ibm.com/

   IBM Personal Software Services Home Page:
      http://ps.software.ibm.com/

FTP:
   FTP to                 ps.software.ibm.com
   logon anonymous
   use your email as your password
   change directory to    /ps/products/bookmanager
   view README.TXT for further directory information

TELEPHONE SUPPORT
-----------------
If you do not have electronic access, or you still have a question,
you may call:

   In the United States    1-800-237-5511
   In Canada               1-800-992-4777

LATE-BREAKING NEWS
------------------
None


TRADEMARKS
----------
  * IBM, OS/2 and BookManager are trademarks of IBM Corporation.
 ** Windows NT and Windows 95 is a trademark of Microsoft Corporation.

RUNNING INDEX UTILITY
---------------------
From a DOS-Command prompt, change directories to that which you installed the 
Index Utility. Type INDEX32 for the help panel. (ie C:\>Program Files\IBM\IBM BookManager\INDEX32). 

UNINSTALLING INDEX UTILITY FOR WINDOWS 95/NT
-------------------------------------------
On systems running the Explorer shell, uninstallation is launched via the Add/Remove 
Programs icon in the Control Panel.