AdapterID 7F8Fh AdapterName "***********EXABYTE SCSI ADAPTER***********" NumBytes 1 NamedItem Prompt "I/O Address Range" Choice "0480H-048FH" pos[0]=xxxx000xb io 0480h-048Fh Choice "0490H-049FH" pos[0]=xxxx001xb io 0490h-049Fh Choice "04A0H-04AFH" pos[0]=xxxx010xb io 04A0h-04AFh Choice "04B0H-04BFH" pos[0]=xxxx011xb io 04B0h-04BFh Choice "04C0H-04CFH" pos[0]=xxxx100xb io 04C0h-04CFh Choice "04D0H-04DFH" pos[0]=xxxx101xb io 04D0h-04DFh Choice "04E0H-04EFH" pos[0]=xxxx110xb io 04E0h-04EFh Choice "04F0H-04FFH" pos[0]=xxxx111xb io 04F0h-04FFh Help "This assignment selects the I/O base address used by this adapter. The address range selected must not conflict with any other adapter." NamedItem Prompt "Interrupt Level" Choice "Interrupt 3" pos[0]=1000xxxxb int 3 Choice "Interrupt 4" pos[0]=1001xxxxb int 4 Choice "Interrupt 5" pos[0]=1010xxxxb int 5 Choice "Interrupt 6" pos[0]=1011xxxxb int 6 Choice "Interrupt 7" pos[0]=1100xxxxb int 7 Choice "Interrupt 10" pos[0]=1101xxxxb int 10 Choice "Interrupt 11" pos[0]=1110xxxxb int 11 Choice "Interrupt 15" pos[0]=1111xxxxb int 15 Help "This selects the interrupt level which the host adapter will use to signal to the host that a SCSI bus operation has been completed and that service is required by the SCSI adapter."