AdapterID 063CAh AdapterName "Hewlett Packard StarLAN-10 Adapter Rev 1.1" NumBytes 1 NamedItem Prompt "Enable/Disable Adapter" Choice " Adapter Enabled " pos[0]=XXXXXXX1b Choice " Adapter Disabled " pos[0]=XXXXXXX0b Help "Lets you enable or disable the StarLAN-10 card. Use the Enabled setting for normal use. Use the Disabled setting if you are not using the StarLAN-10 card and enabling it causes a conflict with another card." NamedItem Prompt "I/O Address Range" choice " 400 to 41F" pos[0]=000XXXXXb io 0400h-041Fh choice "1400 to 141F" pos[0]=001XXXXXb io 1400h-141Fh choice "2400 to 241F" pos[0]=010XXXXXb io 2400h-241Fh choice "3400 to 341F" pos[0]=011XXXXXb io 3400h-341Fh choice "4400 to 441F" pos[0]=100XXXXXb io 4400h-441Fh choice "5400 to 541F" pos[0]=101XXXXXb io 5400h-541Fh choice "6400 to 641F" pos[0]=110XXXXXb io 6400h-641Fh choice "7400 to 741F" pos[0]=111XXXXXb io 7400h-741Fh Help "Selects the range of the I/O addresses used by the StarLAN-10 card. The addresses in the selected range cannot be used by another adapter." NamedItem Prompt "Interrupt Level" choice " Channel 3 " pos[0]=XXXX000Xb int 3 choice " Channel 4 " pos[0]=XXXX001Xb int 4 choice " Channel 5 " pos[0]=XXXX010Xb int 5 choice " Channel 7 " pos[0]=XXXX011Xb int 7 choice " Channel 9 " pos[0]=XXXX100Xb int 9 choice " Channel 10" pos[0]=XXXX101Xb int 10 choice " Channel 11" pos[0]=XXXX110Xb int 11 choice " Channel 12" pos[0]=XXXX111Xb int 12 Help "Selects the interrupt level used by the StarLAN-10 card. The interrupt level may be shared with another adapter. However, an unshared interrupt level will improve adapter performance. Furthermore, the HP OfficeShare network does not allow for sharing the interrupt level."