;p1800 ProNET-10 Network Adapter for PS/2 ;Adapter Description File ; AdapterID 06262h AdapterName "p1800 ProNET-10 Network Adapter for PS/2" NumBytes 4 FixedResources POS[1] = 0XXXXXXXb NamedItem Prompt "DMA Arbitration Level" Choice "Level 6" POS[1] = XXX00110b arb 6d Choice "Level 0" POS[1] = XXX00000b arb 0d Choice "Level 1" POS[1] = XXX00001b arb 1d Choice "Level 2" POS[1] = XXX00010b arb 2d Choice "Level 3" POS[1] = XXX00011b arb 3d Choice "Level 4" POS[1] = XXX00100b arb 4d Choice "Level 5" POS[1] = XXX00101b arb 5d Choice "Level 7" POS[1] = XXX00111b arb 7d Choice "Level 8" POS[1] = XXX01000b arb 8d Choice "Level 9" POS[1] = XXX01001b arb 9d Choice "Level 10" POS[1] = XXX01010b arb 10d Choice "Level 11" POS[1] = XXX01011b arb 11d Choice "Level 12" POS[1] = XXX01100b arb 12d Choice "Level 13" POS[1] = XXX01101b arb 13d Choice "Level 14" POS[1] = XXX01110b arb 14d Choice "Level 0 and 1" POS[1] = XXX10000b arb 0d 1d Choice "Level 2 and 3" POS[1] = XXX10010b arb 2d 3d Choice "Level 4 and 5" POS[1] = XXX10100b arb 4d 5d Choice "Level 6 and 7" POS[1] = XXX10110b arb 6d 7d Choice "Level 8 and 9" POS[1] = XXX11000b arb 8d 9d Choice "Level 10 and 11" POS[1] = XXX11010b arb 10d 11d Choice "Level 12 and 13" POS[1] = XXX11100b arb 12d 13d Help "DMA Arbitration: An arbitration level of 0 has the highest priority, and increasing levels have corresponding decreased priority. The assignment can be changed by selecting 'Change Configuration' and then using the F5=Previous and the F6=Next keys. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and must be changed." NamedItem Prompt "Interrupt Level" Choice "Interrupt level 5" POS[1] = X10XXXXXb int 5d Choice "Interrupt level 10" POS[1] = X01XXXXXb int 10d Help "Interrupt Level: This adapter can operate on one of two interrupt levels: 5 or 10. The assignment for this interrupt level can be changed by selecting 'Change Configuration' and then using the F5=Previous and the F6=Next keys. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and must be changed." NamedItem Prompt "I/O Base Address" Choice "0x10E0" POS[2] = 00011110b io 010E0h - 010EFh Choice "0x10F0" POS[2] = 00011111b io 010F0h - 010FFh Choice "0x30C0" POS[2] = 00111100b io 030C0h - 030CFh Choice "0x30D0" POS[2] = 00111101b io 030D0h - 030DFh Choice "0x50A0" POS[2] = 01011010b io 050A0h - 050AFh Choice "0x50B0" POS[2] = 01011011b io 050B0h - 050BFh Choice "0x7080" POS[2] = 01111000b io 07080h - 0708Fh Choice "0x7090" POS[2] = 01111001b io 07090h - 0709Fh Choice "0x9060" POS[2] = 10010110b io 09060h - 0906Fh Choice "0x9070" POS[2] = 10010111b io 09070h - 0907Fh Choice "0xB040" POS[2] = 10110100b io 0B040h - 0B04Fh Choice "0xB050" POS[2] = 10110101b io 0B050h - 0B05Fh Choice "0xD020" POS[2] = 11010010b io 0D020h - 0D02Fh Choice "0xD030" POS[2] = 11010011b io 0D030h - 0D03Fh Choice "0xF000" POS[2] = 11110000b io 0F000h - 0F00Fh Choice "0xF010" POS[2] = 11110001b io 0F010h - 0F01Fh Help "I/O Address: The I/O base address only has to be changed if there is a conflict. The assignment of the I/O base address can can be changed by selecting 'Change Configuration' and then using the F5=Previous and the F6=Next keys. If an assignment has an asterisk (*) by it, it is in conflict with another assignment and must be changed." NamedItem Prompt "Arbitration Fairness Feature" Choice "Enable the Fairness Feature" POS[0] = XXXXXX1Xb Choice "Disable the Fairness Feature" POS[0] = XXXXXX0Xb Help "Arbitration Fairness Feature: Enabling the arbitration fairness feature allows the system to service all arbitrating devices in order of priority before the same device can gain control of the channel again. By default, the fairness feature is enabled, and it is recommended that it remain enabled. The assignment can be changed by selecting 'Change Configuration' and then using the F5=Previous and the F6=Next keys."