; ; $Source: d:/usr/andy/src/adp/RCS/@608e.exp $ ; $Revision: 1.1 $ ; $Date: 91/05/01 13:54:53 $ ; ; $Log: @608e.exp $ ;Revision 1.1 91/05/01 13:54:53 andy ;Initial revision ; ; AdapterID 0608Eh AdapterName "Hyperam MC 32/16 MF" NumBytes 4 FixedResources pos[0]=11111111b pos[1]=11111111b pos[2]=11xxxxxxb pos[3]=1111xxxxb NamedItem Prompt "EMS window address" Choice "C000-CFFF (64K)" pos[2]=xxxx0000b mem 0c0000h-0cffffh Choice "C400-D3FF (64K)" pos[2]=xxxx0001b mem 0c4000h-0d3fffh Choice "C800-D7FF (64K)" pos[2]=xxxx0010b mem 0c8000h-0d7fffh Choice "CC00-DBFF (64K)" pos[2]=xxxx0011b mem 0cc000h-0dbfffh Choice "D000-DFFF (64K)" pos[2]=xxxx0100b mem 0d0000h-0dffffh Choice "C000-D7FF (96K)" pos[2]=xxxx0101b mem 0c0000h-0d7fffh Choice "C800-DFFF (96K)" pos[2]=xxxx0110b mem 0c8000h-0dffffh Choice "C000-DFFF (128K)" pos[2]=xxxx0111b mem 0c0000h-0dffffh Choice "C000-C3FF (16k - EMS off)" pos[2]=xxxx1000b mem 0c0000h-0c3fffh Choice "C400-C7FF (16k - EMS off)" pos[2]=xxxx1001b mem 0c4000h-0c7fffh Choice "C800-CBFF (16k - EMS off)" pos[2]=xxxx1010b mem 0c8000h-0cbfffh Choice "CC00-CFFF (16k - EMS off)" pos[2]=xxxx1011b mem 0cc000h-0cffffh Choice "D000-D3FF (16k - EMS off)" pos[2]=xxxx1100b mem 0d0000h-0d3fffh Choice "D400-D7FF (16k - EMS off)" pos[2]=xxxx1101b mem 0d4000h-0d7fffh Choice "D800-DBFF (16k - EMS off)" pos[2]=xxxx1110b mem 0d8000h-0dbfffh Choice "DC00-DFFF (16k - EMS off)" pos[2]=xxxx1111b mem 0dc000h-0dffffh Help "To configure the Hyperam MC 32/16 MF, an EMS 'window' must be set at a location in high memory. This 'window' can be from 64kb to 128kb in size but can not conflict with other devices already installed in your system. If you do NOT wish to use Expanded Memory, you must set a 16kb 'window' that is used to initialise the board for extended memory. Again, this window must not conflict with other devices." NamedItem Prompt "Serial Port Address" Choice "2F8 (int 3)" pos[3]=xxxx01xxb io 02f8h-02ffh int 3 Choice "3F8 (int 4)" pos[3]=xxxx10xxb io 03f8h-03ffh int 4 Choice "2F8 (int 4)" pos[3]=xxxx00xxb io 02f8h-02ffh int 4 Choice "Disabled" pos[3]=xxxx11xxb Help "To enable the serial port on your hyperam MC 32/16 MF board, select an address and interrupt combination that does not conflict with other devices in your system. The serial port may be turned off by selecting 'Disabled' option." NamedItem Prompt "Parallel Port Address" Choice "378 (int 7)" pos[3]=xxxxxx10b io 0378h-037fh int 7 Choice "278 (int 7)" pos[3]=xxxxxx00b io 0278h-027fh int 7 Choice "278 (int 5)" pos[3]=xxxxxx01b io 0278h-027fh int 5 Choice "Disabled" pos[3]=xxxxxx11b Help "To enable the parallel port on your hyperam MC 32/16 MF board, select an address and interrupt combination that does not conflict with other devices in your system. The parallel port may be turned off by selecting the 'Disabled' option."