AdapterId 0601Fh AdapterName "Hewlett-Packard Scanner Interface Adapter" NumBytes 1 FixedResources pos[0]=1XXXXXXXb int 7 NamedItem Prompt "I/O Port Location" choice "278-27FH (PARALLEL_3)" pos[0]=X11XXXXXb io 0278h-027Fh choice "268-26FH" pos[0]=X10XXXXXb io 0268h-026Fh choice "258-25FH" pos[0]=X01XXXXXb io 0258h-025Fh choice "248-24FH" pos[0]=X00XXXXXb io 0248h-024Fh Help "This adapter requires eight I/O ports. There are four choices for the location of these ports. Normally choice [278-27FH] will be fine. However, if you already have a parallel port configured as Parallel port 3, or some other adapter that uses these locations there will be a conflict (indicated by an asterisk). Use the F5=Previous and F6=Next keys while in the Change Configuration display to find a choice that does not conflict with other adapters in the system (the asterisk will go away)." NamedItem Prompt "Memory Location" choice "Segment C400" pos[0]=XXX1001Xb mem 0C4000h - 0C7FFFh choice "Segment CC00" pos[0]=XXX1011Xb mem 0CC000h - 0CFFFFh choice "Segment DC00" pos[0]=XXX1111Xb mem 0DC000h - 0DFFFFh choice "Segment D800" pos[0]=XXX1110Xb mem 0D8000h - 0DBFFFh choice "Segment D400" pos[0]=XXX1101Xb mem 0D4000h - 0D7FFFh choice "Segment D000" pos[0]=XXX1100Xb mem 0D0000h - 0D3FFFh choice "Segment C000" pos[0]=XXX1000Xb mem 0C0000h - 0C3FFFh choice "Segment C800" pos[0]=XXX1010Xb mem 0C8000h - 0CBFFFh Help "This adapter requires 16 Kbytes of memory space from the adapter ROM area. There are eight memory locations that can be selected. Under normal conditions, [Segment C400] will be fine. If there is a conflict (indicated by an asterisk), select another segment using the F5=Previous and F6=Next keys while in the Change Configuration display until the asterisk goes away."