AdapterID 050F5h AdapterName "Scan-Graphics Compression/Decompression Accelerator" NumBytes 4 FixedResources pos[3]=110XXXXXb NamedItem Prompt "Daughter Card ID" Choice "Any" pos[2]=XXXXX000b Choice "CF" pos[2]=XXXXX001b Choice "ACES" pos[2]=XXXXX010b Choice "Fujitsu" pos[2]=XXXXX011b Choice "Wicks" pos[2]=XXXXX100b Help "This value is used for machines with more than one scanner installed. If you only have one scanner, choose 'Any'. Otherwise you must select a unique Daughter Card ID for each board installed." NamedItem Prompt "I/O Address Range" Choice "7C00 - 7C1F " pos[1]=00000XXXb io 07C00h-07C1Fh Choice "7C20 - 7C3F " pos[1]=00001XXXb io 07C20h-07C3Fh Choice "7C40 - 7C5F " pos[1]=00010XXXb io 07C40h-07C5Fh Choice "7C60 - 7C7F " pos[1]=00011XXXb io 07C60h-07C7Fh Choice "7C80 - 7C9F " pos[1]=00100XXXb io 07C80h-07C9Fh Choice "7CA0 - 7CBF " pos[1]=00101XXXb io 07CA0h-07CBFh Choice "7CC0 - 7CDF " pos[1]=00110XXXb io 07CC0h-07CDFh Choice "7CE0 - 7CFF " pos[1]=00111XXXb io 07CE0h-07CFFh Help "Determines the range of I/O addresses used by the CDA board." NamedItem Prompt "Interrupt Level" choice "Channel 9 " pos[0]=10XXXXXXb INT 9 choice "Channel 12 " pos[0]=11XXXXXXb INT 12 choice "Channel 3 " pos[0]=00XXXXXXb INT 3 choice "Channel 7 " pos[0]=01XXXXXXb INT 7 Help "Determines the interrupt level used by CDA. This adapter's interrupt level can be shared with another device. You may be able to improve performance by selecting a level that is not used by any other device." nameditem Prompt "DMA Arbitration Level" Choice "Level 6" pos[3]=XXXX0110b arb 6 Choice "Level 7" pos[3]=XXXX0111b arb 7 Choice "Level 0" pos[3]=XXXX0000b arb 0 Choice "Level 1" pos[3]=XXXX0001b arb 1 Choice "Level 3" pos[3]=XXXX0011b arb 3 Choice "Level 4" pos[3]=XXXX0100b arb 4 Choice "Level 5" pos[3]=XXXX0101b arb 5 Help "This selects the DMA channel the CDA will use to transfer data." nameditem Prompt "Fairness On/Off" Choice "On " pos[3]=XXX0XXXXb Choice "Off " pos[3]=XXX1XXXXb Help "Bus Arbitration Fairness. This controls whether the adapter will release control of the bus when it has been using it exclusively. Under normal circumstances, select ."