; Adapter Definition File for Sound Blaster/MCV ; ; Created by: Creative Labs, Inc. ; Edited by: Tomas "Major Tom" Slavotinek AdapterId 5084h AdapterName "Creative Labs, Inc. - Sound Blaster/MCV" NumBytes 4 fixedresources pos[0]=xxxxxxxxb pos[1]=00xxxxxxb pos[3]=xxxx0001b NamedItem Prompt "I/O Address" choice "220 Hex" pos[2]=xxxxx010b io 0220h-022Fh 0338h-0339h choice "230 Hex" pos[2]=xxxxx011b io 0230h-023Fh 0338h-0339h choice "240 Hex" pos[2]=xxxxx100b io 0240h-024Fh 0338h-0339h choice "250 Hex" pos[2]=xxxxx101b io 0250h-025Fh 0338h-0339h choice "260 Hex" pos[2]=xxxxx110b io 0260h-026Fh 0338h-0339h choice "210 Hex" pos[2]=xxxxx001b io 0210h-021Fh 0338h-0339h Help "The I/O address can be assigned to 210H, 220H, 230H, 240H, 250H 260H. 220H is the default option and should provide the best compatibility with existing software. Use [F5] for previous and [F6] for next I/O address." NamedItem Prompt "Arbitration Level (JUMPER!)" choice "Dedicated Level 1" pos[0]=xxxxxxxxb arb 1 choice "Shared Level 1" pos[0]=xxxxxxxxb arb sharedarb 1 Help "The Arbitration Level is always assigned to Level 1 unless the DRQ1 (JP4) jumper is removed (not recommended; the ADF should be edited accordingly!). If the jumper is removed, no DMA is used." NamedItem Prompt "Interrupt Level (JUMPER!)" ;choice "IRQ 3" ; pos[0]=xxxxxxxxb ; int 3 ;choice "IRQ 5" ; pos[0]=xxxxxxxxb ; int 5 choice "IRQ 7" pos[0]=xxxxxxxxb int 7 Help "The IRQ cannot be changed via software and is set to 7, unless the IRQx (JP2) jumper is moved to a different position (not recommended; the ADF should be edited accordingly!)."