;*************************************************************************** ;* Copyright 1992,1993 by NCR Corporation This program contains * ;* proprietary and confidential information. All rights reserved * ;* except as may be permitted by prior written consent. * ;* * ;* ADF file for MCIA-2 board. Revision 1.01.00.00 5/09/94 * ;* * ;*************************************************************************** AdapterId 0098h AdapterName "NCR Micro Channel Communications I/F Adapter (MCIA-2)" NumBytes 4 FixedResources pos[3]=XXX00000b NamedItem Prompt "I/O Address Select" choice "0400h-07FF" pos[0]=0000011Xb io 00400h-007FFh choice "0800h-0BFF" pos[0]=0000101Xb io 00800h-00BFFh choice "0C00h-0FFF" pos[0]=0000111Xb io 00C00h-00FFFh choice "1000h-13FF" pos[0]=0001001Xb io 01000h-013FFh choice "2000h-23FF" pos[0]=0010001Xb io 02000h-023FFh choice "2800h-2BFF" pos[0]=0010101Xb io 02800h-02BFFh choice "4000h-43FF" pos[0]=0100001Xb io 04000h-043FFh choice "4800h-4BFF" pos[0]=0100101Xb io 04800h-04BFFh choice "5000h-53FF" pos[0]=0101001Xb io 05000h-053FFh choice "5800h-5BFF" pos[0]=0101101Xb io 05800h-05BFFh choice "6000h-63FF" pos[0]=0110001Xb io 06000h-063FFh choice "8000h-83FF" pos[0]=1000001Xb io 08000h-083FFh choice "8800h-8BFF" pos[0]=1000101Xb io 08800h-08BFFh choice "9000h-93FF" pos[0]=1001001Xb io 09000h-093FFh choice "9800h-9BFF" pos[0]=1001101Xb io 09800h-09BFFh choice "A000h-A3FF" pos[0]=1010001Xb io 0A000h-0A3FFh choice "C000h-C3FF" pos[0]=1100001Xb io 0C000h-0C3FFh choice "C800h-CBFF" pos[0]=1100101Xb io 0C800h-0CBFFh choice "D000h-D3FF" pos[0]=1101001Xb io 0D000h-0D3FFh choice "D800h-DBFF" pos[0]=1101101Xb io 0D800h-0DBFFh choice "E000h-E3FF" pos[0]=1110001Xb io 0E000h-0E3FFh Help "This selection must be UNIQUE. You may set the I/O address to any one of the addresses listed. If your selection conflicts with an I/O address already assigned in your system, it will be marked with an asterisk and you must select an alternate address." NamedItem Prompt "MCIA Board Arbitration Level" choice "ARB LEVEL 0" pos[1]=XXXX0000b ARB 0 choice "ARB LEVEL 1" pos[1]=XXXX0001b ARB 1 choice "ARB LEVEL 2" pos[1]=XXXX0010b ARB 2 choice "ARB LEVEL 3" pos[1]=XXXX0011b ARB 3 choice "ARB LEVEL 4" pos[1]=XXXX0100b ARB 4 choice "ARB LEVEL 5" pos[1]=XXXX0101b ARB 5 choice "ARB LEVEL 6" pos[1]=XXXX0110b ARB 6 choice "ARB LEVEL 7" pos[1]=XXXX0111b ARB 7 choice "ARB LEVEL 8" pos[1]=XXXX1000b ARB 8 choice "ARB LEVEL 9" pos[1]=XXXX1001b ARB 9 choice "ARB LEVEL 10" pos[1]=XXXX1010b ARB 10 choice "ARB LEVEL 11" pos[1]=XXXX1011b ARB 11 choice "ARB LEVEL 12" pos[1]=XXXX1100b ARB 12 choice "ARB LEVEL 13" pos[1]=XXXX1101b ARB 13 choice "ARB LEVEL 14" pos[1]=XXXX1110b ARB 14 Help "This selection must be UNIQUE. This assignment need only be changed if it is in conflict with another assignment. If your selection conflicts with a selection already assigned in your system, it will be marked with an asterisk and you must select an alternate Arbitration Level." NamedItem Prompt "Fairness Enable" choice "Enabled " pos[1]=1001XXXXb choice "Disabled" pos[1]=1000XXXXb Help "Suggest setting this to Enabled. This allows other bus masters to preempt a DMA operation if needed." NamedItem Prompt "Host Adapter Board Interrupt Level" choice "INT LEVEL 10" pos[2]=011XXXXXb INT 10 choice "INT LEVEL 11" pos[2]=100XXXXXb INT 11 choice "INT LEVEL 4" pos[2]=000XXXXXb INT 4 choice "INT LEVEL 7" pos[2]=001XXXXXb INT 7 choice "INT LEVEL 9" pos[2]=010XXXXXb INT 9 choice "INT LEVEL 12" pos[2]=101XXXXXb INT 12 choice "INT LEVEL 14" pos[2]=110XXXXXb INT 14 choice "INT LEVEL 15" pos[2]=111XXXXXb INT 15 Help "The interrupt used by the NCR MCIA can be shared among multiple boards. Set the Interrupt Level so it will not conflict with other interrupting devices." NamedItem Prompt "MCIA Shared RAM Memory Address" choice "CC000000 32 BIT SLOT ONLY" pos[2]=XXX11001b mem CC000000h-CC07FFFFh choice "C6000000 32 BIT SLOT ONLY" pos[2]=XXX10111b mem C6000000h-C607FFFFh choice "C4000000 32 BIT SLOT ONLY" pos[2]=XXX10110b mem C4000000h-C407FFFFh choice "C2000000 32 BIT SLOT ONLY" pos[2]=XXX10101b mem C2000000h-C207FFFFh choice "C0000000 32 BIT SLOT ONLY" pos[2]=XXX10100b mem C0000000h-C007FFFFh choice "AC000000 32 BIT SLOT ONLY" pos[2]=XXX10011b mem AC000000h-AC07FFFFh choice "A8000000 32 BIT SLOT ONLY" pos[2]=XXX10010b mem A8000000h-A807FFFFh choice "A6000000 32 BIT SLOT ONLY" pos[2]=XXX10001b mem A6000000h-A607FFFFh choice "A4000000 32 BIT SLOT ONLY" pos[2]=XXX10000b mem A4000000h-A407FFFFh choice "A2000000 32 BIT SLOT ONLY" pos[2]=XXX01111b mem A2000000h-A207FFFFh choice "A0000000 32 BIT SLOT ONLY" pos[2]=XXX01110b mem A0000000h-A007FFFFh choice "8C000000 32 BIT SLOT ONLY" pos[2]=XXX01101b mem 8C000000h-8C07FFFFh choice "8A000000 32 BIT SLOT ONLY" pos[2]=XXX01100b mem 8A000000h-8A07FFFFh choice "88000000 32 BIT SLOT ONLY" pos[2]=XXX01011b mem 88000000h-8807FFFFh choice "86000000 32 BIT SLOT ONLY" pos[2]=XXX01010b mem 86000000h-8607FFFFh choice "84000000 32 BIT SLOT ONLY" pos[2]=XXX01001b mem 84000000h-8407FFFFh choice "82000000 32 BIT SLOT ONLY" pos[2]=XXX01000b mem 82000000h-8207FFFFh choice "08480000 32 BIT SLOT ONLY" pos[2]=XXX00111b mem 08480000h-084FFFFFh choice "08400000 32 BIT SLOT ONLY" pos[2]=XXX00110b mem 08400000h-0847FFFFh choice "00E00000 16/32 BIT SLOT" pos[2]=XXX00101b mem 00E00000h-00E7FFFFh choice "00D00000 16/32 BIT SLOT" pos[2]=XXX00100b mem 00D00000h-00D7FFFFh choice "00C80000 16/32 BIT SLOT" pos[2]=XXX00011b mem 00C80000h-00CFFFFFh choice "00A00000 16/32 BIT SLOT" pos[2]=XXX00010b mem 00A00000h-00A7FFFFh choice "00900000 16/32 BIT SLOT" pos[2]=XXX00001b mem 00900000h-0097FFFFh choice "00880000 16/32 BIT SLOT" pos[2]=XXX00000b mem 00880000h-008FFFFFh Help "This selection must be UNIQUE. The MCIA board sets up a 512K byte window starting at this address. This area is used for program loading and data buffers. The Window must be enabled to allow proper operation. If your selection conflicts with a selection already assigned in your system, it will be marked with an asterisk and you must select an alternate address. For proper MCIA operation when installed in 16 bit slots, an entry marked '16/32 SLOT' must be used."