********************************************************************** * INSTALLATION INSTRUCTIONS * * * * PLEASE PRINT OUT THESE INSTRUCTIONS OR WRITE THEM DOWN BEFORE * * STARTING THIS FLASH UPDATE UTILITY. * * * ********************************************************************** IBM PC 700-MC PENTIUM BIOS UPDATE INSTRUCTIONS -------------------------------------------------- THIS CODE IS FOR THE FOLLOWING MACHINE(S)... -------------------------------------------------- Machine(s) Description ---------- ---------------------------------------------------- 6876 PC 700-MC (3X3) 6886 PC 700-MC (5X5) =========================================================================== ---- About Applied Fixes or Features Added ---- (CHANGES.NEW) is another file on this diskette that lists known problems corrected and/or features added after applying this UPDATE to your system. If you would like, please take the time to read or print that file before using this diskette to update your system. =========================================================================== ********************************************************************** * INSTALLATION INSTRUCTIONS * * * * STEPS... * * * * 1 : PLEASE MAKE NOTE OF ANY SETTINGS YOU HAVE CHANGED IN THE * * CONFIGURATION UTILITY. THEY MAY HAVE TO BE RE-ENTERED AFTER * * UPDATING THE BIOS. * * * * 2 : PUT THE FLASH UPDATE DISKETTE IN THE DRIVE AND POWER UP THE * * SYSTEM.. . * * * * -YOU ARE PROMPTED TO SELECT YOUR COUNTRY AND PRESS ENTER. * * * * -THE SERIAL NUMBER IS DISPLAYED AND YOU ARE ASKED IF YOU * * WOULD LIKE TO UPDATE THE SERIAL NUMBER * * * * -IF YOU ANSWER "Y" THEN YOU ARE PROMPTED TO ENTER THE * * CORRECT NUMBER. THEN . . . * * -IF YOU ANSWER "N" THEN . . . * * * * -THE MACHINE MODEL/TYPE IS DISPLAYED AND YOU ARE ASKED IF YOU * * WOULD LIKE TO UPDATE THE MODEL/TYPE * * * * -IF YOU ANSWER "Y" THEN YOU ARE PROMPTED TO ENTER THE * * CORRECT NUMBER. THEN . . . * * -IF YOU ANSWER "N" THEN . . . * * * * 3 : THE CURRENT BIOS LEVEL ON THE COMPUTER IS COMPARED TO THAT ON * * THE FLASH UPDATE DISKETTE. * * * * -IF THE LEVELS ARE THE SAME, A MESSAGE IS DISPLAYED STATING * * "THE POST/BIOS CODE IN THE SYSTEM IS THE SAME VERSION AS * * THAT ON THE DISKETTE. PRESS ENTER TO CONTINUE. PRESS ESC * * TO CANCEL." * * * * -IF THE LEVELS ARE DIFFERENT: * * IF THE LEVEL ON THE FLASH DISKETTE IS NEWER THAN THE ROM * * A MESSAGE IS DISPLAYED STATING "THE SYSTEM POST/BIOS IS * * BEING UPDATED. THIS MAY TAKE UP TO 2 MINUTES. DO NOT POWER * * OFF OR RESTART THE SYSTEM DURING THIS PROCEDURE. * * * * IF THE LEVEL ON THE DISKETTE IS OLDER THAN THE ROM * * * A MESSAGE IS DISPLAYED STATING "THE POST/BIOS IN THE * * SYSTEM IS A NEWER VERSION THAN THAT ON THE DISKETTE * * IF YOU CONTINUE, THE OLDER VERSION WILL REPLACE THE NEWER * * VERSION IN THE SYSTEM." * * IF YOU PRESS ENTER, A MESSAGE IS DISPLAYED "THE SYSTEM POST/* * BIOS IS BEING UPDATED. THIS MAY TAKE UP TO 2 MINUTES. DO NOT* * POWER OFF OR RESTART THE SYSTEM DURING THIS PROCEDURE." * * * * 4 : THE FLASH UPDATE IS NOW COMPLETE. REMOVE THE DISKETTE FIRST * * AND THEN PRESS ENTER TO REBOOT THE SYSTEM. * * * ********************************************************************** Flash Changes PC 700 700 (68X6) N2JTxxA is the flash diskette level. N2KTxxA is the flash image level. (BIOS) NOTE: All changes carry forward. That is, if a change is added in 26, it is also in 27, 28 etc. N2KT/N2JT26 1625 FDD is not operable on os/2 (if 1.2MB formatted diskette in drive a:) 1627 no POST error (162) come up if add scsi drives 1628 Force boot sector virus checksum to be updated if not initialized and just enabled. 1638 PCI must check for conflicts with Audio IRQs before marking them as free 1641 Setup must be run twice after 161 with non-parity memory installed. 1645 Change Boot Sector Virus checking default to disabled N2KT/N2JT28 1392 Suspend/Resume timing problem with modem causes intermittant hangs. 1656 Skyline (IBM PCI Token Ring) adapter hangs on warm boot intermittantly. 1758 Add prompt to set date and time after replacing battery. 1759 No Audio with Win95. Plug and Play information was reported incorrectly. 1760 Configure additional non-conforming CD-ROM devices. Allows certain CD-ROM drives that do not conform to the ATA CD_ROM specification to be recognized. 1763 IRQ7 resource conflict between Audio and LPT1. 1764 AZERTY(French) keyboard m key not usable for password 1765 Add NEC Monitor support to DDC1. Delay added to allow detection of monitors that do not support the application notes of the spec. 1824 ECP/EPP Printer Modes Interrupt Types Wrong for MicroChannel 1829 P/370 and P/390 adapters Hang On Warm Boot (MCA) 1833 System powers up when AC cord plugged after shutting down Win95 1834 Disable the video early in POST on warm boot so the machine does not appear to be hung. N2KT/N2JT30 1622 Clear Software Interrupt 67h during POST. 1810 Second IDE CD-ROM on the same cable not recognized 1844 Add latest S3 BIOS 1862 F1 keypress may be lost during PCI POST 1864 Full Setup menu on warm boot with Administrator password set. 1866 Hang in PCI SCSI Adaptec full screen setup. 1880 Mach5-MC Update for Languages (100, 120, 133, and 150 MHz processors) 1889 Cannot RPL with IBM 16/4 at IRQ 2 with Flash 29A 36095 Skyline (IBM PCI Token Ring) Adapter FIxes N2KT/N2JT31 36106 Add chip support enhancements. N2KT/N2JT32 36264 System hangs with audio default to off when machine was powered on 3 times without a successful boot. Audio was being disabled. N2KT/N2JT33 ** Never Released ** 35997 Int 15, AH=CAh calculates the wrong checksum intermittantly. 36101 Mouse hang after rapid resume if mouse was moved during APM shutdown. 36120 PCI adapters not getting memory enabled if no option ROM is on card. 36258 Century will now roll over to year 2000 in POST 36313 QA+/Win Memory Failure after warm boot N2KT/N2JT34 ** Never Released ** 36340 Fix AZERTY (French) keyboard pointer so we do not lose it 36350 3 MCA SCSI cards cause 164 (memory size) error 36491 Set Default Cache State Bit to Enabled 36568 INT 15h E820 function. This adds support for greater that 64 Meg of memory for Windows NT and Windows/95. 36738 MicroChannel CMOS defaults for ISA Legacy resources are wrong N2KT/N2JT35 ** Never Released ** 36755 100Mhz processor reported as 133MHz by Setup Summary N2KT/N2JT37 ** BUILD FAILURE ** N2KT/N2JT38 36463 4X CDROM does not show up in system summary 36839 Disable IRQ 9 if certain PCI cards are installed. This change fixes adapters that require IRQ 2 or 9. IRQ 9 will now only be disabled if certain PCI token ring cards are installed. The adapters that are known to be fixed with this change are 3278, 3270, and any other that require IRQ 2. N2KT/N2JT39 36951 Force color palette loading if passthru adapter installed 36976 Suspend/Resume fails with certain CDROM drives 36992 Cache size may be incorrectly reported 37003 Save/Restore Video Mode When Clearing Screen in POST 37366 Power switch becomes non-functional (very intermittant) N2KT/N2JT40 ** BUILD FAILURE ** N2KT/N2JT41 38345 POST hangs with XGA-2 installed in non-US countries N2KT/N2JT42 37791 Drives on secondary controller may falsely report not busy and therefore not be recognized during POST. 37792 Int 15 Function E820 returns incorrect values if EBDA was moved by The operating system. No known problems have been encountered. 38527 Change stack pointer during int. 19 to prevent stack overflows. Some PCI SCSI adapters were overlaying the stack and causing various errors including hangs during POST. 38564 Add changes.new and readme.1st files to flash diskette. This will allow the users to see what changes have been made in order to determine if they need to upgrade their systems. 38814 Clear cmos byte 5f if cmos corrupt. This could have caused unread-able screens after a bad battery. 38669 PCI Adapter take MicroChannel space when 64k buffer defined. This shows up if a token ring card uses a 64k buffer. The PCI card took the same memory. This should have caused an 1801 error because the memory was not available. The error will now appear in this scenario. 38545 Memory dump system reset always causes POST error 210. This only occurred if Stand Alone Dump for OS/2 2.11 was taken. N2KT/N2JT43 39036 Update video BIOS to correct cursor problem when using Windows at 1024X768X8 at 72Hz. N2KT/N2JT44 39324 Fix intermittant 201 (memory parity) errors. (No customer reported problems - only seen in manufacturing test.) N2KT/N2JT45 41045 Fix hang during warmboot with LANStreamer MCA card. This could fail with any busmaster MCA card. Reset MCA channel before ROM shadowing. 40243 Microchannel reset timing incorrect. No known problems caused by this. This corrects the length of the reset to meet specifications. 39559 162/184 config error. Intermittant configuration errors occur even with no changes. This was found on another system and has not been reported on this system. 39353 Some PCI video cards may conflict with other PCI devices. This was reported on another system. No known problems on this system. N2KT/N2JT46 42094 Fix century byte location to match other micro channel systems. This corrects incorrect date on WIN/NT. 43691 Cache line size may be set incorrectly on some PCI adapters N2KT/N2JT47 50491 Some installations get EMM386 Exception Error #12 49383 1762 error after adding 6X or 8X CDROM Drives. The problem is an error in the chipset on the drive. However, we will change the detection code to get around the chip problem. This only fails on drives with one vendors chipset. 50944 Matrox PG2-1281 does not work. No video from either the planar or Adapter. 1762 error after adding 6X or 8X CDROM Drives. This corrects a problem that caused the drives to hang when they were attached as a slave, or would also hang a hard disk if it was attached as a slave to one of these drives. This failure only occurred with certain combination of CDROM drives and certain hardfiles. N2KT/N2JT48A Update the flash utility for manufacturing. No other changes in this level. N2KT/N2JT49A LPT3 fails after APM events when using WIN/95. Test programs checking "Year 2000" under DOS could fail even though the clock updated correctly. 110 errors in POST with memory installed in all slots and Intel P54CTB upgrade processor installed. N2KT/N2JT50A Update century byte in location 37h as well as 32h. Some software is checking either location. This is a fallback to PS/2 architecture.