AdapterID 00FC7h
AdapterName "Wizard Attached Processor"
NumBytes 3
nameditem
Prompt "Adapter I/O Location"
Choice "Base Address 8AA0"
pos[0]=XXXX000Xb
io 8AA0h-8AAFh
Choice "Base Address 9AA0"
pos[0]=XXXX001Xb
io 9AA0h-9AAFh
Choice "Base Address AAA0"
pos[0]=XXXX010Xb
io 0AAA0h-0AAAFh
Choice "Base Address BAA0"
pos[0]=XXXX011Xb
io 0BAA0h-0BAAFh
Choice "Base Address CAA0"
pos[0]=XXXX100Xb
io 0CAA0h-0CAAFh
Choice "Base Address DAA0"
pos[0]=XXXX101Xb
io 0DAA0h-0DAAFh
Choice "Base Address EAA0"
pos[0]=XXXX110Xb
io 0EAA0h-0EAAFh
Choice "Base Address FAA0"
pos[0]=XXXX111Xb
io 0FAA0h-0FAAFh
Help
"To configure this adapter you must choose the I/O location the
adapter will use. There are eight I/O locations that can be
selected. Under normal circumstances, select ."
nameditem
Prompt "DMA Arbitration Level"
Choice "Level D"
pos[1]=XXXX1101b
arb 0Dh
Choice "Level E"
pos[1]=XXXX1110b
arb 0Eh
Choice "Level 8"
pos[1]=XXXX1000b
arb 8
Choice "Level 9"
pos[1]=XXXX1001b
arb 9
Choice "Level A"
pos[1]=XXXX1010b
arb 0Ah
Choice "Level B"
pos[1]=XXXX1011b
arb 0Bh
Choice "Level C"
pos[1]=XXXX1100b
arb 0Ch
Help
"This selects the DMA Arbitration level the adapter will use to
transfer data. Under normal circumstances, select ."
nameditem
Prompt "Fairness On/Off"
Choice "On"
pos[1]=XXX1XXXXb
Choice "Off"
pos[1]=XXX0XXXXb
Help
"Bus Arbitration Fairness. This controls whether the adapter will
release control of the bus when it has been using it exclusively.
Under normal circumstances, select ."
nameditem
Prompt "Interrupt Level"
Choice "Level 11"
pos[2]=XXXXXX01b
int 0bh
Choice "Level 10"
pos[2]=XXXXXX00b
int 0ah
Choice "Level 15"
pos[2]=XXXXXX10b
int 0fh
Choice "Level 5"
pos[2]=XXXXXX11b
int 5
Help
"Interrupt Level. This controls the Interrupt line the adapter
will use to signal the host. Under normal circumstances,
select ."