SMC3016 Ethernet Adapter with IBM LAN SUPPORT USING NOVELL LANSUP ODI Driver Communicating with Netware & AS/400 

Note: This configuration supports all Series Ethernet adapters. IBM LAN SUPPORT VERSION 1.30 AND ABOVE IS NEEDED.

NET.CFG
Link Driver LANSUP
	IRQ=10
             Frame Ethernet_802.3
             Frame Ethernet_802.2
             Frame Ethernet_II
             Frame Ethernet_SNAP
             Protocol IPX 0 Ethernet_802.3
Netware DOS Requester
	FIRST NETWORK DRIVE = F
	NETWARE PROTOCOL = NDS BIND

PROTOCOL.INI
[PROTMAN_MOD]
    	DriverName = PROTMAN$

[DXME0_NIF]
 	DriverName=DXME0$
Bindings = SMC3000

[SMC3000]
	Drivername = SMC_ETH$

CONFIG.SYS
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS 
DEVICE=C:\LSP\PROTMAN.DOS /I:C:\LSP
DEVICE=C:\LSP\SMC3000.DOS
DEVICE=C:\LSP\DXMA0MOD.SYS 001
DEVICE=C:\LSP\DXME0MOD.SYS ,16,0
DEVICE=C:\LSP\DXMT0MOD.SYS O=N ES=2 EST=2

AUTOEXEC.BAT
CLS
CD\LSP\NETBIND
CD\NWCLIENT
LSL
LANSUP
IPXODI
NETX OR VLM
F:									Document 2325