Power/Audio Connector (J10)
Power Card Connector (J9)
Power/Audio Connector (J10)
The input voltage on pins 1, 2, and 9 should be between 32 and 40 V.
Pin | Signal |
1,2,9 | +36 V |
3,7,10,11,14,15 | Ground |
4,5,12,13 | Reserved |
6,8 | Audio |
Power Card Connector (J9)
The power card converts the input voltage (+36 V) supplied by the PSU inside
the monitor to +5 V, +12 V, and -12 V. It also generates the Power Good signal.
System Unit
Pin | Signal |
1 | Ground |
2 | Ground |
3 | +36 V (input) |
4 | +36 V (input) |
5 | -12 V |
6 | Ground |
7 | +12 V |
8 | +12 V |
9 | -Fault |
10 | Ground |
11 | +5 V |
12 | +5 V |
13 | +5 V |
14 | +5 V |
15 | Ground |
16 | Power Good |
17 | Ground |
|
Adapter Card Unit (ACU)
Pin | Signal |
1 | Ground |
2 | Ground |
3 | -Fault |
4 | +36 V (input) |
5 | +36 V (input) |
6 | Ground |
7 | Ground |
8 | +5 V ref |
9 | +5 V |
10 | +5 V |
11 | +5 V |
12 | +5 V |
13 | +5 V |
14 | -12 V |
15 | -5 V |
16 | Power Good |
17 | Ground |
|
|