M32UTL.ZIP - ATI Technologies Inc. ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ ATI Technologies Inc. ÛÛÛÛÛÛÛÛ(R)ÛÛÛß ÜÜÜ ßÛÛ 33 Commerce Valley Drive East ÛÛÛÛÛÛÛÛÛÛÛÛß ßßß ÜÛÛ Thornhill, ON L3T 7N6 ÛÛÛÛÛÛÛÛÛÛß ÜÛÛÛÛÛ ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ CANADA ÛÛÛÛÛÛÛÛß ÜÛÛßßÛÛÛ ÛÛÛÛÛÛÛÛß ßÛÛÛÛ ÛÛÛÛÛÛß ÜÛÛÛ ÛÛ ÛÛÛÛÛÛÛÛ ÛÛÛÛ Support: (905) 882-2626 ÛÛÛÛß ÜÛÛÛÛÛÛÜÜÛÛÛ ÛÛÛÛÛÛÛÛ ÛÛÛÛ Support FAX: (905) 882-0546 ÛÛß ÜÛÛÛÛÛÛÛÛÛÛÛÛÛ ÛÛÛÛÛÛÛÛ ÛÛÛÛ Compuserve: GO ATITECH ÛÛÜ ÜÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÜ ÜÛÛÛÛÛÛÛÛÜ ÜÛÛÛÛ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÛÛÛÛßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßÛÛÛÛÛ ³Installation & Configuration ³ ÛÛÛÝ T E C H N O L O G I E S I N C . ÞÛÛÛÛ ³ Utilities for ATI mach32 ³ ÛÛÛÛÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÛÛÛÛÛ ³ accelerators v2.3 ³ ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Files Included: 186343 Implode 96555 49% 04-28-94 16:11 727e1ebe --w INSTALL.EXE 25387 Implode 8434 67% 04-05-94 16:08 93321fdd --w INSTALL.HLP 1388 Implode 686 51% 03-03-94 09:42 52bf5ea6 --w INSTALL.VSF 58493 Implode 31834 46% 04-21-94 17:45 03586966 --w SCRN_ADJ.EXE 9763 Implode 2336 77% 04-08-94 12:57 67132367 --w MONITOR.DAT 28691 Implode 16672 42% 04-21-94 17:45 737ddfca --w C-INFO.EXE 127386 Implode 65941 49% 04-29-94 12:45 eb16ef18 --w TEST.EXE 21418 Implode 10739 50% 05-08-92 08:54 86eab515 --w MOUSE.COM 17640 Implode 9943 44% 06-02-92 12:04 c615798a --w MOUSE.SYS 8961 Implode 5990 34% 08-04-93 14:19 c828e726 --w VESATEST.EXE 7295 Implode 2949 60% 05-02-94 16:59 324cba5e --w VVESA.TXT 13548 Implode 8486 38% 09-20-93 16:52 d6343340 --w VVESA.COM 62585 Implode 34099 46% 08-13-93 10:46 ff214fad --w VGRAF.EXE 2736 Implode 1364 51% 08-13-93 16:25 c7a34515 --w VGRAF.TXT 3933 Implode 1831 54% 05-02-94 16:59 724841c1 --w README.VGF 3824 Implode 2495 35% 08-30-93 16:37 83980f18 --w DPMS.COM 8005 Implode 3276 60% 05-02-94 16:47 4223cfba --w README.DPM 45989 Implode 27620 40% 01-24-94 14:00 2995f3f0 --w VDIF.EXE 16542 Implode 2398 86% 01-21-94 08:37 67d69fce --w NEC_3FGE.VDA 13808 Implode 2047 86% 01-21-94 08:38 f64b054c --w NEC_4FGE.VDA 13811 Implode 2053 86% 01-21-94 08:38 00d5a415 --w NEC_5FGE.VDA 6612 Implode 2692 60% 05-02-94 16:59 b55f08c3 --w README.VDI 11905 Implode 3499 71% 03-03-94 19:42 2ddfacdd --w !ATI4400.CFG 11898 Implode 3496 71% 03-03-94 19:41 dd2efc3c --w !ATI4402.CFG 10625 Implode 3162 71% 03-03-94 19:45 960a2c77 --w !ATI4410.CFG 6828 Implode 2151 69% 08-13-93 16:11 da008375 --w !ATI4430.CFG 1754 Implode 910 49% 02-10-94 13:24 cc1c7917 --w @8089.ADF 3299 Implode 1200 64% 02-10-94 13:29 42134aaa --w @808A.ADF ------ ------ --- ------- 730467 354858 52% 28 NOTES: 1. This archive contains an "Installation and Configuration" only package for the mach32 accelerators. It is NOT meant to be a substitute for the original diskettes which ship with these boards. The package can be used to configure the mach32 boards, but will not allow you to install supplemental drivers. 2. Ensure that you have a copy of PKUNZIP.EXE, v1.10 or later. PKUNZIP is available on most BBS and information services, including the ATI BBS and CompuServe. 3. Create a directory on your hard disk to hold the Installation and Configuration utilities (eg MD \M32UTL). 4. Unzip the archive into that directory, change directory, and run the INSTALL program: PKUNZIP M32UTL.ZIP \M32UTL CD \M32UTL INSTALL **Windows Users: DO NOT attempt to run the INSTALL program under Windows. Exit Windows completely and run the program from DOS. See "DOS Users". **OS/2 Users: INSTALL may be run from a full screen DOS session under OS/2. If INSTALL behaves erratically, try pressing ALT-HOME to bring it to the desktop, then back to full screen. Alternately, you can boot DOS and use INSTALL to configure the card before returning to OS/2. **DOS Users: If you experience difficulties with the INSTALL program (eg. some features do not function properly, or INSTALL reports "Adapter Not Detected" or similar errors), "clean boot" the system and try again. DOS 6.0 and higher allows a clean boot by holding down F5 after the "Starting MS-DOS" message. For earlier versions of DOS, create a boot disk with FORMAT A: /S, then boot from the floppy drive. 5. The INSTALL program will allow you to set the operating parameters for the mach32 accelerator. Ensure that you use the "Set Power Up Configuration" option to set your monitor type. 6. MOUSE.COM and MOUSE.SYS are provided for mach32 cards which come equipped with a mouse port. Not all ATI accelerators support a mouse. MOUSE.COM can be loaded from the DOS command line, or in AUTOEXEC.BAT. MOUSE.SYS must be loaded from CONFIG.SYS, using a "DEVICE=" or "DEVICEHIGH=" statement. Note that these mouse drivers are for DOS. ATI does not provide mouse drivers for Windows, OS/2 or other operating environments. To use the ATI mouse port in one of these environments, choose any mouse driver which conforms to the "InPort" or "Bus Mouse" specifications (eg "Microsoft or IBM PS/2"). 7. A few additional utilities are also included, with their own README files, as shown below: DPMS .COM -Display Power Management Utility, see README.DPM VDIF .EXE -VESA Monitor Definition Utility, see README.VDI VGRAF.EXE -Graphics File Viewer, see README.VGF and VGRAF.TXT VVESA.COM -VESA Super VGA BIOS Extension, see VVESA.TXT 8. MicroChannel Systems - two MCA configuration files (@8089.ADF and @808A.ADF) are included. Depending on your MCA configuration utility (or "Resource Disk"), you may need to copy these files to a floppy disk, or to your system reference disk. Consult your system manual for details. 9. EISA Systems - four EISA configuration files (!ATI44??.CFG) are included. Depending on your EISA configuration utility ("ECU"), you may have to copy these files to a floppy disk, or to your system configuration disk. Consult your system manual for details.