*** Package Information *** The complete family of installation packages for Windsurfer are: WSWISA - Mwave Windows support for Windsurfer/ISA (2 diskettes) LICENSE.TXT ;License agreement WSWISA01.ZIP ;Mwave Windows ISA support disk 1 WSWISA02.ZIP ; " disk 2 WSWMCA - Mwave Windows support for Windsurfer/MCA (2 diskettes) LICENSE.TXT ;License agreement WSWMCA01.ZIP ;Mwave Windows MCA support disk 1 WSWMCA02.ZIP ; " disk 2 WSWARP - Mwave Warp support for Windsurfer ISA or MCA (3 diskettes) LICENSE.TXT ;License agreement WSWARP01.ZIP ;Mwave Warp support disk 1 WSWARP02.ZIP ; " disk 2 MWAVEVSD.ZIP ;Mwave sampled sound synth for Warp SAMPLES - Full MIDI samples for OS/2 & Windows (7 diskettes) LICENSE.TXT ;License agreement OS2SMP01.ZIP ;MIDI samples disk 1 (OS/2) WINSMP01.ZIP ;MIDI samples disk 1 (Windows) SMPS02.ZIP ;MIDI samples disk 2 (common) SMPS03.ZIP ; " disk 3 (common) SMPS04.ZIP ; " disk 4 (common) SMPS05.ZIP ; " disk 5 (common) SMPS06.ZIP ; " disk 6 (common) *** Unpacking the Diskettes *** Diskettes are ZIP files. BE CERTAIN to use the "-d" option when unpacking, as most of the images need to create subdirectories on the diskette. For example: pkunzip -d WSWISA02.ZIP a: *** Installation Instructions *** The following applies to installing Mwave beta support for Windows, WinOS2, and OS/2. Some testing has been done using Win95 as well, but I have no experience in this area. I would recommend that Win95 users follow the directions for Windows. A major difference now is the separate samples install. This will make future installs easier because you may not have to reinstall the samples. **** Important **** MwaveVSD is for Warp ONLY. Do not attempt to install it on less than OS/2 3.0. To install for Warp for Windows with a dual boot DOS/Windows environment: 1. Boot DOS/Windows and install Mwave Windows support. 2. Boot Warp and install Mwave OS/2 support. 3. Reboot Warp and install MwaveVSD audio support. 4. Install SAMPLES either under Warp or Windows. To install for Warp Fullpack: 1. If you also run DOS/Windows, install Mwave Windows support there first. 2. Go into a WinOS2 session and install Mwave Windows support (even if you did step 1). 3. Exit WinOS2 and without rebooting, install Mwave OS/2 support. 4. Reboot Warp and install MwaveVSD audio support. 5. Install SAMPLES either under Warp or Windows.