* * *Technical Document # - **3724433** * ____________________________________________________________ Family: *LAN* Product: *OS/2 Warp Connect* Release: *All* Syslevel: Last Updated:* *02-23-96 ____________________________________________________________ _TITLE_ Connecting OS/2 Warp Connect Peer to a Windows NT System _DESCRIPTION_ This document describes how to connect an OS/2 Warp Connect system to a system using IBM Peer or IBM LAN Requester. _RESOLUTION_ 1. Make sure the userid is defined on the NT server, and that the logon is the same as that used to log on to an IBM LAN Server. A unit using OS/2 Warp Connect Peer defaults to a local logon. 2. At a command prompt, type the following and press *Enter* (*/name/* is the domain name of the NT server): *LOGON USERID /P:PASSWORD /V:DOMAIN /D:name* If you log on locally (to your own Peer system), make sure your userid and password are the same as those for the NT server. This allows you to access NT resources from your Peer system. NT servers have user logon profiles that can be set to give assignments when the user logs on. The profiles are built using DOS batch commands (xxxx.BAT). To get the logon profiles to work from an OS/2 Warp Connect system, the NT administrator must create a new OS/2 batch file (xxxx.CMD) and remove any references to DOS batch files. The CMD file must be located in either of the following: \SYSTEM32\REPL\EXPORT\SCRIPTS \SYSTEM32\REPL\IMPORT\SCRIPTS ____________________________________________________________