AdapterId 0809Ah AdapterName "#9GXi Graphix Coprocessor" NumBytes 1 NamedItem Prompt "Enable/Disable Adapter" Choice " Adapter Enabled " pos[0]=XXXXXXX1b Choice " Adapter Disabled " pos[0]=XXXXXXX0b Help "This allows the adapter to be enabled or disabled without removing it from the system. If disabled, Setup must be run again to enable the adapter." NamedItem Prompt "I/O Host Interface Address" Choice " 02A0 to 02AF " pos[0]=XXXX010Xb io 02a0h-02afh Choice " 0280 to 028F " pos[0]=XXXX000Xb io 0280h-028fh Choice " 0290 to 029F " pos[0]=XXXX001Xb io 0290h-029fh Choice " 02B0 to 02BF " pos[0]=XXXX011Xb io 02b0h-02bfh Choice " 02C0 to 02CF " pos[0]=XXXX100Xb io 02c0h-02cfh Choice " 02D0 to 02DF " pos[0]=XXXX101Xb io 02d0h-02dfh Choice " 02E0 to 02EF " pos[0]=XXXX110Xb io 02e0h-02efh Help "This is used to set the I/O HOST INTERFACE ADDRESS." NamedItem Prompt "Enable/Disable Interupts" Choice " Interupts Disabled " pos[0]=XXX0XXXXb Choice " Interupts Enabled " pos[0]=XXX1XXXXb Help "This allows the adapter to enable or disable interupts." NamedItem Prompt "Interupt Level" Choice " IRQ10 " pos[0]=000XXXXXb INT 10 Choice " IRQ11 " pos[0]=100XXXXXb INT 11 Choice " IRQ12 " pos[0]=010XXXXXb INT 12 Choice " IRQ15 " pos[0]=110XXXXXb INT 15 Choice " IRQ7 " pos[0]=001XXXXXb INT 7 Choice " IRQ3 " pos[0]=101XXXXXb INT 3 Choice " IRQ4 " pos[0]=011XXXXXb INT 4 Choice " IRQ5 " pos[0]=111XXXXXb INT 5 Help "Determines the interupt level used by the #9GXi."