;PS/2 MCABase Adapter Database, 2007 ;=================================== AdapterID 07154h AdapterName "Invisible Ethernet-2/A" NumBytes 1 nameditem Prompt "I/O Port, ROM Address" Choice "I/O 1000-102F, ROM Disabled" pos[0]=XXX1001Xb io 01000h-0102fh Choice "I/O 2020-204F, ROM Disabled" pos[0]=XXX1010Xb io 02020h-0204fh Choice "I/O 8020-804F, ROM Disabled" pos[0]=XXX1011Xb io 08020h-0804fh Choice "I/O A0A0-A0CF, ROM Disabled" pos[0]=XXX1100Xb io 0a0a0h-0a0cfh Choice "I/O B0B0-B0DF, ROM Disabled" pos[0]=XXX1101Xb io 0b0b0h-0b0dfh Choice "I/O C0C0-C0EF, ROM Disabled" pos[0]=XXX1110Xb io 0c0c0h-0c0efh Choice "I/O C3D0-C3FF, ROM Disabled" pos[0]=XXX1111Xb io 0c3d0h-0c3ffh Choice "I/O 1000-102F, ROM C800-CBFF" pos[0]=XXX0001Xb io 01000h-0102fh mem 0c8000h-0cbfffh Choice "I/O 2020-204F, ROM C800-CBFF" pos[0]=XXX0010Xb io 02020h-0204fh mem 0c8000h-0cbfffh Choice "I/O 8020-804F, ROM CC00-CFFF" pos[0]=XXX0011Xb io 08020h-0804fh mem 0cc000h-0cffffh Choice "I/O A0A0-A0CF, ROM CC00-CFFF" pos[0]=XXX0100Xb io 0a0a0h-0a0cfh mem 0cc000h-0cffffh Choice "I/O B0B0-B0DF, ROM D000-D3FF" pos[0]=XXX0101Xb io 0b0b0h-0b0dfh mem 0d0000h-0d3fffh Choice "I/O C0C0-C0EF, ROM D000-D3FF" pos[0]=XXX0110Xb io 0c0c0h-0c0efh mem 0d0000h-0d3fffh Choice "I/O C3D0-C3FF, ROM D400-D7FF" pos[0]=XXX0111Xb io 0c3d0h-0c3ffh mem 0d4000h-0d7fffh Help "This selects the address where the adapter I/O port is located, and the memory address where the NETBIOS ROM is located. There are seven different I/O ports and four different memory addresses you can select. You can also disable the ROM if you prefer to use the RAM-based NETBIOS instead. Use the F5=Previous and F6=Next keys to change this selection. Conflicting selections are marked with an asterisk and must be changed. Under normal circumstances, select ." nameditem Prompt "Interrupt level" Choice "IRQ 3" pos[0]=X00XXXXXb int 3 Choice "IRQ 4" pos[0]=X01XXXXXb int 4 Choice "IRQ 5" pos[0]=X10XXXXXb int 5 Choice "IRQ 9" pos[0]=X11XXXXXb int 9 Help "This selects the interrupt level that the adapter uses to request service from the System Unit. You can select IRQ 3, IRQ 4, IRQ 5, or IRQ 9. Use the F5=Previous and F6=Next keys to change this selection. Conflicting selections are marked with an asterisk and must be changed. Under normal circumstances, select ."