AdapterId 6091h AdapterName "Stallion Technologies ONboard2 Terminal System on a Card" NumBytes 2 NamedItem Prompt "ONboard2 Card Select" Choice "BOARD0 Mem=EC0000 I/O=7C0 Int=15" pos[0]=11101001b pos[1]=XXXXX100b io 7c0h-7cfh int 15 mem 0ec0000h-0ecffffh Choice "BOARD1 Mem=EA0000 I/O=7A0 Int=12" pos[0]=11000101b pos[1]=XXXXX010b io 7a0h-7afh int 12 mem 0ea0000h-0eaffffh Choice "BOARD2 Mem=E80000 I/O=780 Int=11" pos[0]=10100001b pos[1]=XXXXX000b io 780h-78fh int 11 mem 0e80000h-0e8ffffh Choice "BOARD3 Mem=EE0000 I/O=7E0 Int=10" pos[0]=10001101b pos[1]=XXXXX110b io 7e0h-7efh int 10 mem 0ee0000h-0eeffffh Choice "BOARD4 mem=0C0000 IO=7F0 int=7" pos[0]=0111XXX1b pos[1]=XXXXX111b io 7f0h-7ffh int 7 mem 00c0000h-00cffffh Choice "DISABLED" pos[0]=XXXXXXX0b Help "The default setting is BOARD 0. If you are using more than one ONboard2 in your system you must ensure that each ONboard2 is set to a unique board number. Use the F5=Previous and F6=Next keys to change the assignment. Conflicting assignments are marked with an asterisk and must be changed before the ONboard2 can be enabled."