AdapterId 05d58h AdapterName "Scientific Solutions DAS-1616" NumBytes 2 NamedItem Prompt "Address Selection" choice "110-117" pos[0]=xxxx001xb io 0110h-0117h choice "210-217" pos[0]=xxxx010xb io 0210h-0217h choice "310-317" pos[0]=xxxx011xb io 0310h-0317h choice "410-417" pos[0]=xxxx100xb io 0410h-0417h choice "510-517" pos[0]=xxxx101xb io 0510h-0517h choice "610-617" pos[0]=xxxx110xb io 0610h-0617h choice "710-717" pos[0]=xxxx111xb io 0710h-0717h choice "Disable" pos[0]=xxxxxxx0b Help "The base address of the DAS-1616 can be at one of 7 different locations. Choose a location which does not conflict with any other installed board. 'Disable' will cause the DAS-1616 to not be available. This assignment need only be changed if it is in conflict with another board. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change address selection when you are in the 'Change configuration' window." NamedItem Prompt "Timer Interrupt Select" choice "Interrupt 11" pos[1]=x10xxxxxb int 11 choice "Interrupt 15" pos[1]=x11xxxxxb int 15 choice "Interrupt 3" pos[1]=x00xxxxxb int 3 choice "Interrupt 5" pos[1]=x01xxxxxb int 5 Help "The timer interupt select chooses which interrupt level the timer will cause interrupts. Minimize the amount of interrupt sharing by assigning other installed boards to different levels. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change the interrupt level selection if you are in the 'Change configuration' window." NamedItem Prompt "DMA Arbitration Level" choice "Level 1" pos[1]=xxxx0001b arb 1 choice "Level 2" pos[1]=xxxx0010b arb 2 choice "Level 3" pos[1]=xxxx0011b arb 3 choice "Level 5" pos[1]=xxxx0101b arb 5 choice "Level 6" pos[1]=xxxx0110b arb 6 choice "Level 7" pos[1]=xxxx0111b arb 7 choice "Level 8" pos[1]=xxxx1000b arb 8 choice "Level 9" pos[1]=xxxx1001b arb 9 choice "Level 10" pos[1]=xxxx1010b arb 10 choice "Level 11" pos[1]=xxxx1011b arb 11 choice "Level 12" pos[1]=xxxx1100b arb 12 choice "Level 13" pos[1]=xxxx1101b arb 13 choice "Level 14" pos[1]=xxxx1110b arb 14 choice "Level 4" pos[1]=xxxx0100b arb 4 choice "Level 0" pos[1]=xxxx0000b arb 0 choice "Disable" pos[1]=xxxx1111b Help "The DMA Arbitration Level chooses at what level of priority the DAS-1616 will request DMA reads of the Analog to Digital Converter FIFO. The higher the number, the lower the priority. This assignment need only be changed if it is in conflict with another board. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change DMA Arbitration Level selection when you are in the 'Change configuration' window." NamedItem Prompt "DMA Request mode" choice "Fair" pos[1]=xxx1xxxxb choice "Hog" pos[1]=xxx0xxxxb Help "Choose 'Fair' if all boards need equal access to the Micro-Channel--this is the standard choice. Choose 'Hog' if the DAS-1616 needs extremely urgent access to the bus." NamedItem Prompt "Input Polarity" choice "Bipolar" pos[0]=xx1xxxxxb choice "Unipolar" pos[0]=xx0xxxxxb Help "Choose 'Unipolar' if Analog Inputs are always positive. Choose 'Bipolar' if both positive and negative voltages are present." NamedItem Prompt "Input Mode" choice "Single-Ended" pos[0]=xxx1xxxxb choice "Differential" pos[0]=xxx0xxxxb Help "Choose 'Single-Ended' if Analog Inputs are referenced to a common ground. Choose 'Differential' if each input has a separate voltage reference."