PUNBKEND(1,C) AIX Commands Reference PUNBKEND(1,C) ------------------------------------------------------------------------------- punbkend PURPOSE Punch backend (file transfer). SYNTAX +------------+ /usr/lpd/punbkend ---| +--------+ |---| +-| -uuser |-+ ^| -nnode || || -ttext || || -fname || |+--------+| +----------+ Note: This command is for the System/370 only. DESCRIPTION The file transfer function uses the print command internally to invoke the punch backend. The queue must be one which is defined in the /etc/qconfig file as being serviced by /usr/lpd/punbkend. The punbkend backend accepts the following options to build a tag (nodeid userid text) and a file name for the spool file: -uuser The userid of the user who is to receive the spooled punch output. If omitted, the output is passed to RSCS and the userid of the tag is left blank. -nnode The nodeid where the spooled output is sent. The -nnode option may be used as follows: o If omitted but -uuser is specified, the user is assumed to belong to the local AIX/370 master-subsystem or the same subsystem as the sender. o If the specified node is the nodeid for the local VM system and -uuser is also specified, the output is passed to the virtual machine identified by -uuser. o For all other conditions, the output is passed to RSCS and the -nnode is used to build the tag. For all these conditions, a blank default value is used. Processed November 8, 1990 PUNBKEND(1,C) 1 PUNBKEND(1,C) AIX Commands Reference PUNBKEND(1,C) -ttext A text string. Used with the -uuser and -nnode to build the tag for the punch output. -fname Specifies the file name that is to be attached to the spooled punch output. The default is blank. FILES /etc/qconfig /usr/lpd/punkbend RELATED INFORMATION See the following commands: "print" and "rdrdaemon." See also the qconfig file format in the AIX Operating System Technical Reference. Processed November 8, 1990 PUNBKEND(1,C) 2